-
How to properly install the electromagnetic flowmeter ?2019-08-08Because of the advantages of electromagnetic flowmeters, the number of enterprises using electromagnetic flowmeters has increased. How to install electromagnetic flowmeters, what kind of electromagnetic flowmeter installation requirements can make it bett
-
How to select an orifice plate flow meter?2019-06-26The orifice plates meter are usually used in pipe sizes exceeding four inches in diameter, and must be carefully installed to make sure that no portion of the flange or gasket interferes with the opening. Flange taps are used with both types of plates, an
-
-
Why Is Electromagnetic Induction Technology a Good Fit for Liquid Flow Measurement?2019-06-18This technology has a number of advantages when it comes to liquid flow measurement. The sensors are generally inserted in line into the pipes’ diameter, and are therefore designed such that they do not disturb or restrict the flow of the medium under mea
-
How to Use Magnetic Flowmeters2019-06-17Magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. Magnetic flowmeters can measure properly when the electrical conductivity of the liquid is greater than approximately 5μS/cm.
-
Which is the cheapest device for measuring flow rate?2019-06-14When a flow nozzle is placed in a pipe carrying whose rate of flow is to be measured, the flow nozzle causes a pressure drop which varies with the flow rate. This pressure drop is measured using a differential pressure sensor and when calibrated this pres
-
What is the Throttle Device?2019-06-13A throttle is the mechanism by which fluid flow is managed by constriction or obstruction.
-
-
Is Power Dissipation of the Flowmeter Important?2019-06-11Yes. The excitation currents for electromagnetic flow meters can be quite large, from up to 50 mA for smaller diameters up to 500 mA or 1 A for larger diameter pipes. The constant current circuit can consume significant amount of power and board area when
-