Features of balanced flowmeter
As a balanced flowmeter supplier, we can tell you the features of balanced flowmeter.
1. High accuracy
Multi-orifice flowmeter sensor is actually a flow rectifier, can effectively eliminate swirl and distorted velocity distribution improvements, the ideal state of the flow field approximation, the conventional measure for level 0.5, high accuracy measurement for level 0.2.
2. High turn down ratio
Multi-orifice flowmeter sensor is a with multi holes, select the appropriate equivalent diameter ratio, favor the lower limit of the flow also give consideration to the upper limit flow ,making the conventional measure flow turndown ratio of 10:1, if appropriate parameter selection, turndown ratio can be raised to 20: 1 ~ 30:1
3. Low requirement for straight pipe
Balanced flowmeter sensor can adjust the flow stable and pressure recovery 2 times faster than conventional orifice throttling device, greatly reducing the requirement for straight pipe. Lower straight pipe section can be as small in most cases 0.5D ~ 2D, a balanced flow meter can save a lot of straight pipe sections, in particular pipe with expensive special materials.
4. Low Pressure loss
Balanced flowmeter multi-orifice symmetrical design reduces the formation of vortices and turbulence of friction, reducing the kinetic energy loss. In the same working condition without reducing the differential pressure, balance flow meter can reduce 1/2~1/3 permanent pressure loss comparing with the conventional throttle device to reduce the cost.