Three Basic Requirements for Orifice Flowmeter Installation
Basic requirements for orifice flowmeter installation such as Integrated Orifice Flowmeter:
(1). For the new piping system, the standard orifice plate must be installed after the wire is swept to prevent the debris in the pipe from blocking or damaging the standard orifice plate.
(2) carefully check whether the number, digit and specification of the standard orifice plate conform to the pipe conditions, flow range and other parameters before installation. One end marked "+" near the pressure inlet shall be connected to the upstream pipe section of the fluid, and one end marked "-" shall be connected to the downstream pipe section of the fluid.
(3). The center line of the standard orifice plate shall be coaxial with the center line of the pipe.
We are Throttling Device Supplier. In fact, We aslo supply Top Mounted Magnetic Float Level Gauge and more.Welcome to our website know more details.