An orifice plate is called a calibrated orifice if it has been calibrated with an appropriate fluid flow and a traceable flow measurement device.

The pressure in a pipe of still fluid and the pressure in the same pipe with the fluid now moving are different. If a pressure gauge were mounted on the pipe it would read a higher pressure when the fluid was still than when it was flowing through the pip

The orifice plate flow meter is commonly used in clean liquid, gas, and steam services. It is available for all pipe sizes but it is very cost-effective for measuring flows in larger ones. The orifice plate is also approved by many organizations for custo

These level gauges are very suitable for interface reading: the level gauge float has only to sink in the liquid having lower specific gravity and to float on the liquid having higher specific gravity.

Some magnetic flowmeters are better suited to specific tasks than others, making flowmeter selection and proper application important concerns in a fluid measurement project. Issues of cost, accuracy, reliability, and ease of use are some of the significa

The Vortex Flowmeter market has excelled its profit bar due to the application of strategic intelligence on a global scale.

When an object is put in the way of a flowing fluid (gas or liquid) in a pipe its presence obstructs the passage of the fluid. The fluid is forced to go around it. The flow diversion requires energy to power the motion and it is supplied from the fluid by

​There are many different types of level indicators, each with its own application.

“If you can’t measure it, you can’t manage it.” An often heard quote in industry and particularly relevant to flow measurement.

Magnetic level gauges work on the principle of communicating vessels, therefore the level in the measuring chamber will be the same as the level in the vessel.