Magnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. Magnetic flowmeters can measure properly when the electrical conductivity of the liquid is greater than approximately 5μS/cm.

These level gauges are very suitable for interface reading: the level gauge float has only to sink in the liquid having lower specific gravity and to float on the liquid having higher specific gravity.

Some magnetic flowmeters are better suited to specific tasks than others, making flowmeter selection and proper application important concerns in a fluid measurement project. Issues of cost, accuracy, reliability, and ease of use are some of the significa

When a flow nozzle is placed in a pipe carrying whose rate of flow is to be measured, the flow nozzle causes a pressure drop which varies with the flow rate. This pressure drop is measured using a differential pressure sensor and when calibrated this pres

A throttle is the mechanism by which fluid flow is managed by constriction or obstruction.

A flow meter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas. When choosing flowmeters, one should consider such intangible factors as familiarity of plant personnel, their experience with calibration

The Vortex Flowmeter market has excelled its profit bar due to the application of strategic intelligence on a global scale.

When an object is put in the way of a flowing fluid (gas or liquid) in a pipe its presence obstructs the passage of the fluid. The fluid is forced to go around it. The flow diversion requires energy to power the motion and it is supplied from the fluid by

Yes. The excitation currents for electromagnetic flow meters can be quite large, from up to 50 mA for smaller diameters up to 500 mA or 1 A for larger diameter pipes. The constant current circuit can consume significant amount of power and board area when